Danfoss VLT AutomationDrive FC 301 Programming Manual page 185

Parameter Descriptions
3.15.10 15-6* Option Ident.
This read-only parameter group contains information about
the hardware and software configuration of the options
installed in slots A, B, C0, and C1.
15-60 Option Mounted
Array [8]
Range: Function:
0 [0 - 30 ] Shows the type of the installed option.
*
15-61 Option SW Version
Array [8]
Range: Function:
0 [0 - 20 ] View the installed option software version.
*
15-62 Option Ordering No
Array [8]
Range: Function:
0 [0 - 8 ] Shows the ordering number for the installed
*
options.
15-63 Option Serial No
Array [8]
Range: Function:
0 [0 - 18 ] View the installed option serial number.
*
15-70 Option in Slot A
Range: Function:
0 N/A [0 - 0 View the type code string for the option
*
N/A] installed in slot A and a translation of the
type code string. For example, for type code
string AX, the translation is No option.
15-71 Slot A Option SW Version
Range: Function:
0 N/A [0 - 0 N/A] View the software version for the option
*
installed in slot A.
15-72 Option in Slot B
Range: Function:
0 N/A [0 - 0 View the type code string for the option
*
N/A] installed in slot B and a translation of the
type code string. For example, for type code
string BX, the translation is No option.
15-73 Slot B Option SW Version
Range: Function:
0 N/A [0 - 0 N/A] View the software version for the option
*
installed in slot B.
MG33MO02
Programming Guide
15-74 Option in Slot C0
Range:
0 N/A
*
15-75 Slot C0 Option SW Version
Range:
0 N/A
*
15-76 Option in Slot C1
Range:
0 N/A
*
15-77 Slot C1 Option SW Version
Range:
0 N/A
*
15-80 Fan Running Hours
Range:
0 h [0 - 2147483647
*
h]
15-81 Preset Fan Running Hours
Range:
0 h [0 - 99999 h] Enter the preset fan running hours counter,
*
15-89 Configuration Change Counter
Range:
0 [0 - 65535]
*
Danfoss A/S © 01/2018 All rights reserved.
Function:
[0 - 0 View the type code string for the option
N/A] installed in slot C and a translation of the
type code string. For example, for type code
string CXXXX, the translation is No option.
Function:
[0 - 0 N/A] View the software version for the option
installed in slot C.
Function:
[0 - 0 N/A] Shows the type code string for the option
in slot C1 (CXXXX if no option) and the
translation, that is No option.
Function:
[0 - 0 N/A] Shows the software version for the installed
option in option slot C.
Function:
View how many hours the heat sink
fan has run (increments for every
hour). The value is saved when the
frequency converter is turned off.
Function:
see parameter 15-80 Fan Running Hours.
This parameter cannot be selected via the
serial port, RS485.
Function:
NOTICE
This parameter cannot be adjusted while
the motor is running.
3 3
183