Danfoss VLT AutomationDrive FC 301 Programming Manual page 220

Parameter Descriptions
36-64 Terminal X49/11 Bus Control
Range:
0 % [0 - 100 %] This parameter contains the output level of
*
3 3
36-65 Terminal X49/11 Timeout Preset
Range:
0 % [0 - 100 %] The frequency converter sends the value of
*
218
®
VLT
Function:
terminal X49/11 if the terminal is controlled
by a fieldbus.
Function:
this parameter to the output terminal when
the terminal is controlled by a fieldbus and a
timeout is detected.
Danfoss A/S © 01/2018 All rights reserved.
AutomationDrive FC 301/302
MG33MO02