Subaru B9 TRIBECA WX 2007 Manual page 840

asieps_tobira.book 10 ページ ２０１２年２月１０日 金曜日 午後３時２６分
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)
7. Sunshade
A: REMOVAL
1) Remove the glass lid. <Ref. to SR-5, REMOV-
AL, Glass Lid.>
®
2) Loosen the TORX bolt to remove the front sun-
shade bracket.
3) Pull the sunshade until the rear sunshade brack-
et comes into the sight, then loosen the TORX
bolts to remove the sunshade.
Sunshade
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1. CHECK FOR MOVING LOAD OF SUN-
SHADE
1) Attach a spring scale to sunshade edge using a
cloth.
SR-00122
®
2) Pull the spring scale to measure moving load of
the sunshade.
Moving load of sunshade:
Specification
±
18.0
NOTE:
Moving load is larger at the beginning of pulling a
spring scale, so take a spring scale reading while
sunshade sliding smoothly.
3) If moving load exceeds specifications, check the
glass lid, sunshade and frame assembly for im-
SR-00123
proper installation.
SR-10
± ±
5.0 N (1.8 0.5 kgf, 13 3.7 lbf)
SR-00087