Subaru B9 TRIBECA WX 2007 Manual page 496

asieps_tobira.book 17 ページ ２０１２年２月１０日 金曜日 午後３時２６分
2. GENERAL TOOL
ILLUSTRATION
General Description
HVAC SYSTEM (HEATER, VENTILATOR AND A/C)
WRENCH
Various WRENCHES will be required to service any A/C system. A 7 to
40 N·m (0.7 to 4.1 kg-m, 5 to 30 ft-lb) torque wrench and various crow-
foot wrenches will be needed. Open end or flare nut wrenches will be
needed to hold the tube and hose fittings.
AC-00213
Applicator bottle
A small APPLICATOR BOTTLE is recommended to apply compressor
oil to the various parts. It can be available at a hardware or drug store.
AC-00012
Manifold gauge set
A MANIFOLD GAUGE SET (with hoses) is available either from a
refrigerant supplier or an automotive equipment supplier.
AC-00013
Refrigerant recovery system
A REFRIGERANT RECOVERY SYSTEM is used for the recovery and
recycling of A/C system refrigerant after contaminants and moisture
have been removed from the refrigerant.
AC-00014
AC-17
Name and Function