Subaru B9 TRIBECA WX 2007 Manual page 668

asieps_tobira.book 6 ページ ２０１２年２月１０日 金曜日 午後３時２６分
LIGHTING SYSTEM
4. Turn Signal Light and Hazard
Light System
A: WIRING DIAGRAM
1. TURN SIGNAL LIGHT AND HAZARD
LIGHT
<Ref. to WI-103, WIRING DIAGRAM, Turn Signal
Light and Hazard Light System.>
B: INSPECTION
1. TURN SIGNAL SWITCH
<Ref. to LI-10, INSPECTION, Combination Switch
(Light).>
2. HAZARD SWITCH
Measure the resistance between hazard switch ter-
minals.
4 3 2 1
Switch position Terminal No.
OFF
2 and 3
ON
3. TURN SIGNAL AND HAZARD MODULE
Connect the battery and turn signal light bulb to the
module. The module is properly functioning if it
blinks when power is supplied to the circuit.
3 2 1
8 7 6 5 4
Turn Signal Light and Hazard Light System
LI-00527
Standard
1 MΩ or more
Less than 1 Ω
LI-00262
LI-6