Subaru B9 TRIBECA WX 2007 Manual page 202

asieps_tobira.book 127 ページ ２０１２年２月１０日 金曜日 午後３時２６分
AR:DTC 76 PASSENGER'S AIRBAG FAILURE
DTC DETECTING CONDITION:
• Airbag main harness circuit (Passenger's side) is shorted to power supply.
• Airbag module harness circuit (Passenger's side) is shorted to power supply.
• Passenger's airbag module is faulty.
• Airbag control module is faulty.
CAUTION:
• Before diagnosing the airbag system, be sure to turn the ignition switch to OFF, disconnect the
ground terminal from battery, and wait more than 20 seconds before starting to work.
• After replacing the airbag module, seat belt pretensioner, roll connector, control module and sen-
sor, reconnect each part and confirm that the warning light operates properly.
• When inspecting the airbag main harness, disconnect the airbag module connectors and seat belt
pretensioners of the driver's and passenger's seats for safety reasons.
NOTE:
Prior to starting work, prepare two airbag resistors (98299PA040).
WIRING DIAGRAM:
AB6
1 2 3 4 5 6
7 8 9 10 11 12 13 14 15 16 17
18 19 20 21 22 23 24 25 26 27 28
Diagnostic Chart with Trouble Code
AB6 AIRBAG CONTROL MODULE
INFLATOR
(PASSENGER SIDE)
AB9
1 2 3 4
AB(diag)-127
AIRBAG SYSTEM (DIAGNOSTICS)
AB9
AB10
AB-00663