Subaru B9 TRIBECA WX 2007 Manual page 430

asieps_tobira.book 23 ページ ２０１２年２月１０日 金曜日 午後３時２６分
15.Rear Gate Glass
A: REMOVAL
1) Remove the rear wiper motor. <Ref. to WW-19,
REMOVAL, Rear Wiper Motor.>
2) Disconnect the electrical connectors from rear
defogger terminal.
3) Remove the glass in the same procedure as for
windshield glass. <Ref. to GW-18, REMOVAL,
Windshield Glass.>
B: INSTALLATION
1) Mount the fastener on the body.
2) Install the dam rubber.
3) Cut off the cartridge nozzle tip as shown and set
it in sealant gun.
(7)
(3)
A-A
(1)
(2)
(4)
C-C
(1) Glass
(2) Spacer
(3) Adhesive
(4) Fastener
(5) 4 mm (0.15 in)
(6) 8 mm (0.31 in)
(7) 10 mm (0.39 in)
(8) 5.5 mm (0.22 in)
4) Apply adhesive in the same procedure as for
windshield glass. <Ref. to GW-19, INSTALLA-
TION, Windshield Glass.>
5) Insert the glass clip pin into rear gate hole, push
on the area around the clip pin to secure it, and
then push lightly all around the area to seal it.
Rear Gate Glass
60
(6)
(7)
(5)
(1)
(2)
(1)
(2)
(3)
(4)
B-B
GW-00498
GW-23
GLASS/WINDOWS/MIRRORS