Subaru B9 TRIBECA WX 2007 Manual page 693

asieps_tobira.book 31 ページ ２０１２年２月１０日 金曜日 午後３時２６分
28.Room Light
A: REMOVAL
1. MODEL WITHOUT REAR ENTERTAIN-
MENT SYSTEM
1) Disconnect the ground cable from the battery.
2) Remove the lens (A) and mounting screws (B).
3) Disconnect the harness connector and remove
the room light.
2. MODEL WITH REAR ENTERTAINMENT
SYSTEM
The room light bulb is integrated into the rear enter-
tainment system as a single unit; therefore, refer to
Rear Entertainment System for the removal proce-
dure. <Ref. to ET-30, REMOVAL, Rear Entertain-
ment.>
B: INSTALLATION
Install in the reverse order of removal.
Room Light
(A)
LI-00315
(B)
LI-00316
LI-31
C: INSPECTION
1. ROOM LIGHT BULB
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new one.
2. ROOM LIGHT SWITCH
Measure the resistance between room light switch
terminals.
3 2 1
Switch position Terminal No.
OFF —
ON 1 and 3
DOOR 2 and 3
LIGHTING SYSTEM
LI-00257
Standard
1 MΩ or more
1.5±0.5 Ω
1.5±0.5 Ω