Subaru B9 TRIBECA WX 2007 Manual page 319

asieps_tobira.book 26 ページ ２０１２年２月１０日 金曜日 午後３時２６分
ENTERTAINMENT
22.Rearview Camera
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the rear gate trim and disconnect the
rear view camera connector and the ground cable.
<Ref. to EI-51, REMOVAL, Rear Gate Trim.>
3) Detach the license light assembly. <Ref. to LI-
27, REMOVAL, License Plate Light Assembly.>
4) Remove the bolt from the license light assembly,
and remove the rear view camera.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure the maker position of the rear view cam-
era after installation. <Ref. to ET-7, ADJUST-
MENT, Rearview Camera System.>
Rearview Camera
ET-00232
ET-00221
ET-26