Subaru B9 TRIBECA WX 2007 Manual page 431

asieps_tobira.book 24 ページ ２０１２年２月１０日 金曜日 午後３時２６分
GLASS/WINDOWS/MIRRORS
6) About one hour after installation, conduct a leak
test.
(7)
C
(1)
(1) Glass
(2) Glass clip pin
(3) Fastener
7) After completion of all work, allow the vehicle to
stand for about 24 hours.
NOTE:
• When door is opened/closed after glass is bond-
ed, always lower the door glass first, and then
open/close it carefully.
• Move the vehicle slowly.
• For minimum drying time and vehicle standing
time before driving after bonding, follow instruc-
tions or instruction manual from the adhesive man-
ufacturer.
• When a vehicle is returned to the user, tell him or
her that the vehicle should not be subjected to
heavy impact for at least three days.
8) Connect the rear defogger terminals.
9) Install the rear wiper. <Ref. to WW-19, INSTAL-
LATION, Rear Wiper Motor.>
Rear Gate Glass
(3)
B
B
(6)
C
(2)
(4)
(4) Adhesive
(5) Dam rubber
GW-24
(4)
(5)
(6) Spacer
(7) Marks for applying the primer
A
A
(5)
GW-00499