Subaru B9 TRIBECA WX 2007 Manual page 507

asieps_tobira.book 28 ページ ２０１２年２月１０日 金曜日 午後３時２６分
HVAC SYSTEM (HEATER, VENTILATOR AND A/C)
8. Blower Motor
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the glove box lower cover. <Ref. to EI-
37, REMOVAL, Glove Box.>
3) Disconnect the connector of the blower motor.
4) Loosen the screw to remove the blower motor.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
Connect the battery positive (+) terminal to terminal
No. 2 of blower motor connector, and negative (–)
terminal to terminal No. 1. Check the blower motor
for smooth rotation.
2 1
Blower Motor
AC-01277
AC-01278
AC-28