Subaru B9 TRIBECA WX 2007 Manual page 740

asieps_tobira.book 12 ページ ２０１２年２月１０日 金曜日 午後３時２６分
SEAT BELT SYSTEM
6. Second Seat belt
A: REMOVAL
1. OUTER SEAT BELT RH ASSEMBLY AND
LH ASSEMBLY
1) Remove the second-row seats. <Ref. to SE-13,
LH&CTR SEAT, REMOVAL, Second-Row Seats.>
2) Remove the third-row seats. <Ref. to SE-18,
REMOVAL, Third-Row Seats.>
3) Remove the rear quarter trim. <Ref. to EI-45,
REMOVAL, Rear Quarter Trim.>
4) Remove the lower anchor bolt.
5) Remove the bolt to remove outer seat belt re-
tractor.
2. SHOULDER SEAT BELT CENTER AS-
SEMBLY
1) Remove the rear quarter trim. <Ref. to EI-45,
REMOVAL, Rear Quarter Trim.>
2) Remove the cover (A) from roof trim, and then
insert it to the inside of roof trim.
Second Seat belt
3) Remove the clips, and then lower the roof trim
end.
CAUTION:
When removing the roof trim clip, do not pull
the roof trim end backward with excessive
force, otherwise roof trim may be damaged.
4) Remove the bolt to remove the seat belt retrac-
tor.
SB-00308
3. INNER SEAT BELT RH ASSEMBLY
1) Remove the RH second-row seat assembly.
<Ref. to SE-13, LH&CTR SEAT, REMOVAL, Sec-
ond-Row Seats.>
2) Remove the LH hinge outer cover.
3) Remove the bolt, and then detach the inner belt
SB-00309
assembly.
(A)
SB-00236
SB-12
SB-00155
SB-00316
SB-00310