Subaru B9 TRIBECA WX 2007 Manual page 750

asieps_tobira.book 8 ページ ２０１２年２月１０日 金曜日 午後３時２６分
SEATS
C: DISASSEMBLY
1. DRIVER'S SEAT
1) Remove the seat from vehicle. <Ref. to SE-7,
DRIVER'S SEAT, REMOVAL, Front Seat.>
2) Remove the clip (A) and straps (B) on the back
of seat cushion.
(A)
3) Disconnect the following connectors from the
backside of seat cushion.
• Side airbag
• Seat position sensor
• Seat heater
• Power seat
• Seat belt
4) Remove the screw (A) and clips (B), and then
disconnect the seat switch connector to remove
seat side cover outside.
(B)
®
5) Remove the TORX
inner seat belt assembly.
Front Seat
(B)
SE-00643
(B)
(A)
SE-00584
bolt, and then remove the
SE-00585
SE-8
6) Remove the screw (A) and clip (B), and then re-
move the seat side cover inside.
(B)
(A)
7) Remove the two bolts from the reclining hinge on
each left and right side.
8) Remove the clips and hooks, and then detach
the backrest back cover.
SE-00412
SE-00413
SE-00586