Subaru B9 TRIBECA WX 2007 Manual page 261

asieps_tobira.book 4 ページ ２０１２年２月１０日 金曜日 午後３時２６分
COMMUNICATION SYSTEM
3. Horn
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the left and right headlight assemblies.
<Ref. to LI-12, REMOVAL, Headlight Assembly.>
3) Remove the horn bracket mounting bolt (A).
4) Disconnect the harness connector and remove
the horn assembly (B).
(B)
(A)
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
With 12 V direct current supplied between horn ter-
minals, check that the horn sounds properly.
Horn
(B)
(A)
COM00041
COM00020
COM-4