Subaru B9 TRIBECA WX 2007 Manual page 280

asieps_tobira.book 13 ページ ２０１２年２月１０日 金曜日 午後３時２６分
DTC Item
25 Brake Switch Input Circuit
Malfunction
31 Engine speed signal
32 Out of vehicle speed range
of cruise control operation
34 Prohibition when accelera-
tor position is continued to
be large
35 Prohibition when vehicle
speed feedback is impos-
sible
41 VDC/TCS operation
43 ABS/VDC malfunction
44 Body integrated unit mal-
function
45 Meter Failure
61 Brake Switch Malfunction
62 Neutral Position Switch
Malfunction
63 Vehicle Speed Variation is
Abnormal
64 Engine Sensor Related
Sensor Malfunction 1
List of Diagnostic Trouble Code (DTC)
Contents of diagnosis
Malfunction of brake switch input circuit in ECM is
detected.
• Abnormal increase of engine speed is detected.
• Gear is placed in Neutral, 1st or Reverse position.
• Vehicle speed is out of the controlled range during
cruising.
• Set operation was performed at vehicle speed unavail-
able for setting.
• Resume operation was performed without memorized
vehicle speed.
The vehicle has been driven at higher speed than set
vehicle speed for an abnormally long time (approxi-
mately 10 minutes) during cruise driving.
Set vehicle speed cannot be kept because of some rea-
sons (steep uphill, parking brake, abnormal decrease of
engine output, etc.) during cruise driving.
Vehicle dynamics control (VDC) or TCS is operated dur-
ing cruise driving or cruise setting.
Vehicle dynamics control (VDC) system malfunction is
detected during cruise driving or cruise setting.
Body integrated unit system malfunction is detected dur-
ing cruise driving or cruise setting.
Combination meter malfunction is detected during cruise
driving or cruise setting.
Malfunction in the stop light switch or brake switch is
detected.
Neutral position switch malfunction is detected.
Malfunction of vehicle speed signal variation is detected. <Ref. to CC(diag)-24,
Malfunction related to engine is detected.
CC(diag)-13
CRUISE CONTROL SYSTEM (DIAGNOSTICS)
Reference
<Ref. to CC(diag)-23,
DTC 25, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>
Cruise in more than 2nd
shift position.
This DTC is displayed,
though the vehicle speed
is increased to the speed
available for cruise set and
set operation was per-
formed again.
<Ref. to CC(diag)-23,
DTC 32, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>
<Ref. to CC(diag)-23,
DTC 34, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>
<Ref. to CC(diag)-23,
DTC 35, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>
<Ref. to CC(diag)-23,
DTC 41, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>
<Ref. to CC(diag)-23,
DTC 43, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>
<Ref. to CC(diag)-23,
DTC 44, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>
<Ref. to CC(diag)-23,
DTC 45, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>
<Ref. to CC(diag)-24,
DTC 61, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>
<Ref. to CC(diag)-24,
DTC 62, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>
DTC 63, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>
<Ref. to CC(diag)-24,
DTC 64, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>