Subaru B9 TRIBECA WX 2007 Manual page 690

asieps_tobira.book 28 ページ ２０１２年２月１０日 金曜日 午後３時２６分
License Plate Light
LIGHTING SYSTEM
25.License Plate Light
A: REMOVAL
1) Remove the license plate light mounting screw
(A) and then remove the lens (B).
(B) (B)
(A)
(A)
LI-00520
2) Remove the bulb.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new one.
LI-28