Subaru B9 TRIBECA WX 2007 Manual page 695

asieps_tobira.book 33 ページ ２０１２年２月１０日 金曜日 午後３時２６分
30.Rear Gate Light
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the bulb inspection cover of rear gate
trim, then disconnect the harness connectors.
3) Remove the bulb.
B: INSTALLATION
Install in the reverse order of removal.
Rear Gate Light
C: INSPECTION
1. REAR GATE LIGHT BULB
1) Visually check the bulb for blow out.
2) Check the bulb specification. <Ref. to LI-2,
SPECIFICATION, General Description.>
3) If NG, replace the bulb with a new one.
2. REAR GATE LIGHT SWITCH
Measure the resistance between trunk lid switch
terminals.
Trunk lid position
Close
Open
LI-00523
LI-00524
LI-33
LIGHTING SYSTEM
3 2 1
LI-00529
Terminal No. Standard
1 MΩ or more
1 and 3
1.5±0.5 Ω