Subaru B9 TRIBECA WX 2007 Manual page 757

asieps_tobira.book 15 ページ ２０１２年２月１０日 金曜日 午後３時２６分
2. CTR SEAT
1) Remove the seat from vehicle. <Ref. to SE-13,
LH&CTR SEAT, REMOVAL, Second-Row Seats.>
2) Remove the hinge outer cover.
3) Remove the two reclining hinge bolts of 2nd seat
CTR, then remove the seat backrest.
4) Remove the backrest back cover.
5) Remove the hooks and hog rings (A) at the rear
side of backrest.
: (A)
6) Remove the nut, then remove the armrest and
arm rest rear board.
7) Remove the four screws securing the arm rest.
8) Remove the nut, then remove the armrest rear
board and arm rest.
9) Remove the seat backrest latch cover.
Second-Row Seats
10) Remove the hog rings (A) on the front face of
the backrest, and then remove the backrest cover
from the backrest.
: (A)
11) Remove the two bolts securing the seat back-
rest latch, then remove the seat backrest latch.
SE-00601
3. RH SEAT
1) Remove the seat from vehicle. <Ref. to SE-13,
RH SEAT, REMOVAL, Second-Row Seats.>
SE-00609
2) Remove the headrest.
3) Remove the hinge outer cover.
4) Remove the backrest back cover.
5) Remove the hog rings (A) and hooks at the rear
face of the backrest.
: (A)
SE-00610
SE-15
SEATS
SE-00611
SE-00612
SE-00613