Subaru B9 TRIBECA WX 2007 Manual page 751

asieps_tobira.book 9 ページ ２０１２年２月１０日 金曜日 午後３時２６分
9) Remove the lock clip, and then remove the lum-
ber support lever.
10) Remove the hooks and hog rings at the rear
side of backrest.
11) Remove the headrest lock bushing.
NOTE:
Push outside to remove it from the inside of seat.
12) Remove the hog rings.
Front Seat
13) Remove the cover frame (A).
SE-00414
14) Pull out the backrest frame assembly.
15) Remove the side airbag module.
SE-00587
16) Remove the two bolts on each left and right
side, and then remove the reclining motor assem-
bly.
17) Remove the hog rings (A) on the surface side
SE-00243
of backrest, and then remove the backrest cover
from backrest.
SE-00588
: (A)
SE-9
SEATS
(A)
SE-00337
SE-00589
SE-00388
SE-00590