Subaru B9 TRIBECA WX 2007 Manual page 527

asieps_tobira.book 48 ページ ２０１２年２月１０日 金曜日 午後３時２６分
In-vehicle Sensor (Auto A/C Model)
HVAC SYSTEM (HEATER, VENTILATOR AND A/C)
24.In-vehicle Sensor (Auto A/C
Model)
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Remove the instrument panel lower panel on
driver's side. <Ref. to EI-36, REMOVAL, Instru-
ment Panel Lower Cover.>
3) Disconnect the connector and aspirator hose,
remove the catch hook and remove the interior
temperature sensor from the knee guard plate.
CAUTION:
Be careful not to damage the sensors and inte-
rior trim when removing.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
<Ref. to AC(diag)-33, IN-VEHICLE SENSOR, Di-
agnostic Procedure for Sensors.>
AC-48