Subaru B9 TRIBECA WX 2007 Manual page 278

asieps_tobira.book 11 ページ ２０１２年２月１０日 金曜日 午後３時２６分
B: CHECK CRUISE INDICATOR LIGHT AND CRUISE SET INDICATOR LIGHT.
TROUBLE SYMPTOM:
Cruise control can be set, but the cruise indicator light and cruise set indicator light do not illuminate.
Step
1 CHECK CRUISE INDICATOR LIGHT AND
CRUISE SET INDICATOR LIGHT.
1) Perform the self-diagnosis of combination
meter. <Ref. to IDI-4, SELF-DIAGNOSIS,
INSPECTION, Combination Meter System.>
2) Check the cruise indicator light and cruise
set indicator light if they illuminate.
2 CHECK LAN COMMUNICATION CIRCUIT
ERROR DISPLAY
1) Complete self-diagnosis, and turn the igni-
tion switch to ON again.
2) Check if the communication error is dis-
played on the odo/trip meter in combination
meter.
Diagnostics with Phenomenon
Check
Do the cruise indicator light and
cruise set indicator light illumi-
nate?
Is the error code "Er xx" dis-
played on odo/trip meter?
CC(diag)-11
CRUISE CONTROL SYSTEM (DIAGNOSTICS)
Yes
Go to step 2.
Replace the meter
case assembly.
<Ref. to IDI-12,
Combination
Meter.>
Check the LAN Replace the ECM.
communication cir- <Ref. to
cuit. FU(H6DO)-33,
<Ref. to Engine Control
LAN(diag)-2, Basic Module (ECM).>
Diagnostic Proce-
dure.>
No