Subaru B9 TRIBECA WX 2007 Manual page 437

asieps_tobira.book 30 ページ ２０１２年２月１０日 金曜日 午後３時２６分
GLASS/WINDOWS/MIRRORS
20.Rearview Mirror
A: REMOVAL
®
1) Remove the TORX
2) Slide the rearview mirror (2) to the upper side (A)
of windshield glass (3), and remove the mirror from
mount (4).
(3)
(4)
(1)
CAUTION:
• Be careful not to damage the mirror surface.
• Be careful not to damage the windshield
glass.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion". <Ref. to GW-5, MIRROR, COMPONENT,
General Description.>
CAUTION:
When tightening the mounting TORX
be sure to observe the tightening torque. Other-
wise, the mount may be damaged in over-
torque conditions.
C: INSPECTION
Check that the mirror is not damaged.
Rearview Mirror
screw (1).
(A)
(2)
GW-00413
®
screw,
GW-30