Subaru B9 TRIBECA WX 2007 Manual page 761

asieps_tobira.book 19 ページ ２０１２年２月１０日 金曜日 午後３時２６分
9) Remove the hog rings (A) and hooks at the rear
face of the backrest.
: (A)
10) Remove the hooks which secure the seat back-
rest to the frame.
11) Remove the hog rings on the rear side of seat
backrest.
: (A)
12) Remove the seat backrest cover.
13) Pull out the frame from the seat backrest cush-
ion.
Third-Row Seats
D: ASSEMBLY
CAUTION:
• Be careful not to stain or damage the back-
rest cover during assembly.
• Always use new hog rings.
• Secure the hog ring using hog ring pliers.
• Install the hog rings to the specified points
securely and make sure that no wrinkle or twist-
ing on backrest cover.
Assemble in the reverse order of disassembly.
1) Assemble the seat cushion in the reverse order
of disassembly.
SE-00627
2) Assemble the backrest in the reverse order of
disassembly.
3) Assemble each inner belt assembly and each
cover in the reverse order of removal.
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion". <Ref. to SE-2, COMPONENT, General
Description.>
E: INSPECTION
Check that there is no tear or fray on the seat cover.
SE-00628
SE-00629
SE-19
SEATS