Subaru B9 TRIBECA WX 2007 Manual page 774

asieps_tobira.book 32 ページ ２０１２年２月１０日 金曜日 午後３時２６分
SEATS
10.FAILS TO PERFORM THE RESTORING OPERATION (DRIVER'S SEAT, WITH MEMORY)
Step
1 CHECK MEMORY FUNCTION.
Perform the memory operation of the seat posi-
tion.
2 CHECK SWITCH.
1) Disconnect the harness connector of mem-
ory switch assembly.
2) Perform the memory switch inspection.
<Ref. to SE-23, CHECK MEMORY SWITCH
(MEMORY-EQUPPED), INSPECTION, Power
Seat System.>
3 CHECK HARNESS.
Measure the resistance between the memory
switch connector and memory module connec-
tor.
Connector & terminal
(R195) No. 13 — (R199) No. 3:
(R195) No. 14 — (R199) No. 2:
(R195) No. 15 — (R199) No. 8:
4 CHECK COMBINATION METER.
Turn the ignition switch to ON and check the
indicator inside the meter while the select lever
is in P position.
5 CHECK OPERATION.
Check the rotation of each motor when perform-
ing all the power seat switch operation.
11.INITIALIZATION IS IMPOSSIBLE.
Step
1 CHECK OPERATION.
Check the rotation of each motor when perform-
ing all the power seat switch operation.
2 CHECK SWITCH.
1) Disconnect the harness connector of power
seat switch assembly.
2) Measure the resistance between all the con-
nector terminals of power seat switch assembly.
<Ref. to SE-22, CHECK POWER SEAT
SWITCH, INSPECTION, Power Seat System.>
Power Seat System
Check
Is the seat position correctly
memorized?
Is there any problem on the
inspection result?
Is the resistance less than 10
Ω?
Does the indicator display P?
Does each motor rotate for one
second or more when operating
each switch?
Check
Does each motor rotate for one
second or more when operating
each switch?
Is there any problem on the
inspection result?
SE-32
Yes No
Go to step 2. <Ref. to SE-31,
FAILS TO STORE
THE LOCATION
TO THE MEMORY
(DRIVER'S SEAT,
WITH MEMORY),
INSPECTION,
Power Seat Sys-
tem.>
Go to step 3.
Replace the mem-
ory switch assem-
bly.
Go to step 4.
Check power seat
harness.
Go to step 5. Check the combi-
nation meter. <Ref.
to IDI-4, INSPEC-
TION, Combina-
tion Meter
System.>
Replace the mem- Encoder defec-
ory module. tion. Replace the
motor(s) found to
be faulty.
Yes No
Go to step 2.
Encoder defec-
tion. Replace the
motor(s) found to
be faulty.
Replace the mem- Replace the power
ory module. seat switch assem-
bly.