asieps_tobira.book 11 ページ 2012年2月10日 金曜日 午後3時26分
D: ASSEMBLY
1. FRONT
1) Insert the wiper rubber onto the blade so that the
stopper is in the position shown in the figure.
2) Make sure the wiper rubber is securely fastened
to pull stopper (A).
2. REAR
A
B
1) Insert the wiper rubber into claw B.
A
Wiper Blade
2) Insert the wiper rubber until its top end protrudes
approx. 20 mm (0.79 in) from stopper D.
3) Insert the wiper rubber into claw A.
WW-00426
E: INSPECTION
1) When the wiper does not operate properly, in-
spect the following item.
WW-00037
• Make sure the movable part of wiper blade as-
sembly moves smoothly.
• Make sure the wiper rubber is not deformed or
damaged.
2) If damaged, replace with a new part.
C
D
WW-00421
B
WW-00145
WW-11
WIPER AND WASHER SYSTEMS
20 mm ( 0.79 in. )
D
WW-00146
A
WW-00147