Subaru B9 TRIBECA WX 2007 Manual page 687

asieps_tobira.book 25 ページ ２０１２年２月１０日 金曜日 午後３時２６分
22.Rear Finisher Light Assembly
A: REMOVAL
1) Remove the bulb inspection cover of the rear
gate trim.
2) Disconnect the harness connector.
3) Remove the mounting nuts and detach the rear
finisher assembly.
B: INSTALLATION
Install in the reverse order of removal.
Rear Finisher Light Assembly
(A)
LI-00516
LI-00517
LI-25
LIGHTING SYSTEM