Subaru B9 TRIBECA WX 2007 Manual page 382

asieps_tobira.book 29 ページ ２０１２年２月１０日 金曜日 午後３時２６分
3. REAR BUMPER BEAM ASSEMBLY
1) Remove the rear bumper face.
2) Remove the energy absorber foam.
3) Remove the nuts, and remove the bumper beam
assembly from vehicle body.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion".
<Ref. to EI-5, REAR BUMPER, COMPONENT,
General Description.>
C: REPAIR
Refer to front bumper repair. <Ref. to EI-23, RE-
PAIR, Front Bumper.>
Rear Bumper
EI-01278
EI-29
EXTERIOR/INTERIOR TRIM