Subaru B9 TRIBECA WX 2007 Manual page 541

asieps_tobira.book 8 ページ ２０１２年２月１０日 金曜日 午後３時２６分
IMMOBILIZER (DIAGNOSTICS)
6. Read Diagnostic Trouble
Code (DTC)
A: OPERATION
1. ECM
1) On the «Main Menu» display screen, select the
{Each System Check}.
2) On the «System Selection Menu» display
screen, select the {Engine Control System}.
3) Select the [OK] after the information of engine
type is displayed.
4) On the «Engine Diagnosis» screen, select the
{DTC Display}.
5) On the «Diagnostic Code(s) Display» screen,
select the {Current Diagnostic Code(s)} or {History
Diagnostic Code(s)}.
NOTE:
• For detailed operation procedure, refer to the
"SUBARU SELECT
MANUAL".
• For detailed concerning DTC, refer to the List of
DTC. <Ref. to IM(diag)-14, LIST, List of Diagnostic
Trouble Code (DTC).>
2. BODY INTEGRATED UNIT
1) On the «Main Menu» display screen, select the
{Each System Check}.
2) On the «System Selection Menu» display
screen, select the {Integ. unit mode}.
3) Select the [OK] after the {Integ. unit mode} is dis-
played.
4) On the «Integ. unit failure diag» display screen,
select the {Diagnostic Code(s) Display}.
NOTE:
• For detailed operation procedure, refer to the
"SUBARU SELECT
MANUAL".
• For detailed concerning DTC, refer to the List of
DTC. <Ref. to IM(diag)-14, LIST, List of Diagnostic
Trouble Code (DTC).>
Read Diagnostic Trouble Code (DTC)
MONITOR OPERATION
MONITOR OPERATION
IM(diag)-8