Subaru B9 TRIBECA WX 2007 Manual page 279

asieps_tobira.book 12 ページ ２０１２年２月１０日 金曜日 午後３時２６分
CRUISE CONTROL SYSTEM (DIAGNOSTICS)
7. List of Diagnostic Trouble Code (DTC)
A: LIST
DTC Item
11 Main Switch
12 Stop light & brake switch
14 Neutral switch
15 Cancel switch
16 Ignition switch
21 Cruise control switch mal-
function when ignition
switch is turned to ON
22 Vehicle Speed Variation
Malfunction
24 Cruise Control Related
Switch Malfunction
List of Diagnostic Trouble Code (DTC)
Contents of diagnosis
Main switch of cruise control command switch is turned
to OFF, and then the cruise control is released.
Stop light switch or brake switch is turned to ON, and
then the cruise control is released.
Neutral position switch is turned to ON, and then the
cruise control is released.
Cancel switch is turned to ON, and then the cruise con-
trol is released.
Ignition switch is turned to OFF, and then the cruise con-
trol is released.
When the ignition switch is turned to ON, each switch of
cruise control command switch is already turned to ON.
Malfunction of vehicle speed signal variation is detected. <Ref. to CC(diag)-22,
Command switch malfunction is detected. (While the
switch is pressed ON for an abnormally long time
(approximately two minutes), open circuit is detected.)
CC(diag)-12
Reference
This DTC is displayed
without operating the main
switch.
<Ref. to CC(diag)-15,
DTC 11, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>
This DTC is displayed
without depressing the
brake pedal.
<Ref. to CC(diag)-17,
DTC 12, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>
This DTC is displayed
without shifting to neutral
position.
<Ref. to CC(diag)-19,
DTC 14, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>
This DTC is displayed
without operating the can-
cel switch.
<Ref. to CC(diag)-20,
DTC 15, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>
This DTC is displayed
without operating the igni-
tion switch.
<Ref. to CC(diag)-21,
DTC 16, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>
This DTC is displayed
without operating the main
switch.
<Ref. to CC(diag)-22,
DTC 21, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>
DTC 22, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>
This DTC is displayed with
normal operation.
<Ref. to CC(diag)-23,
DTC 24, Diagnostic Pro-
cedure with Diagnostic
Trouble Code (DTC).>