Subaru B9 TRIBECA WX 2007 Manual page 374

asieps_tobira.book 21 ページ ２０１２年２月１０日 金曜日 午後３時２６分
6. Front Bumper
A: REMOVAL
1. FRONT BUMPER FACE
1) Remove the front upper cover.
2) Turn over the front mud guard, and remove the
clips connecting the fender and bumper.
3) Remove the clips at the lower side of bumper.
4) Disconnect the fog light connector. (Model with
fog light)
Front Bumper
5) Remove the notch on the bumper face side from
guide bracket (A)
CAUTION:
Do not pull forcefully. It can damage the notch
on the bumper face side.
NOTE:
Lifting the bumper face upward, and removing in
the order of (B), (1)-(5) of the fender side, will make
it easier to remove.
EI-01268
(A)
6) Remove the clips, and then remove the bumper
face from vehicle body.
7) Remove the front grille from bumper face. <Ref.
to EI-20, REMOVAL, Front Grille.>
8) Remove the fog light from bumper face. <Ref. to
LI-18, REMOVAL, Front Fog Light Assembly.>
EI-00572
EI-00573
EI-21
EXTERIOR/INTERIOR TRIM
(5)
(4)
(2)
(3)
(B)
EI-01379
EI-01378
(1)