Subaru B9 TRIBECA WX 2007 Manual page 64

asieps_tobira.book 13 ページ ２０１２年２月１０日 金曜日 午後３時２６分
Inspection Locations After a Collision
AIRBAG SYSTEM
11.PASSENGER'S SEAT
1) Check for the following, and replace the dam-
aged parts with new parts.
• Seat belt buckle body, bracket or connector is
scratched, cracked or deformed.
• Backrest frame for crack or deformation
• Headrest for deformation or play
• If the seat cushion cover and seat backrest cover
is scratched or coming loose, replace with a new
cover and readjust the system. <Ref. to OD(diag)-
17, SYSTEM CALIBRATION (REZEROING), OP-
ERATION, Subaru Select Monitor.>
CAUTION:
If any of the following applies, replace the seat
cushion pad and frame assembly. Do not disas-
semble.
• Cracks or deformation found in the seat
cushion frame or seat cushion pad.
• Scratches, cracks, or deformation found on
the passenger detection system pressure sen-
sor hoses or passenger detection control mod-
ule, or attachment brackets of the control
module.
• Harness and/or connector is cracked, de-
formed or open. Harness wire is exposed.
2) After checking the installing condition of passen-
ger's seat, perform the system calibration of occu-
pant detection system. <Ref. to OD(diag)-17,
SYSTEM CALIBRATION (REZEROING), OPERA-
TION, Subaru Select Monitor.>
12.BELT TENSION SENSOR
Check for the following, and replace the damaged
parts with new parts.
• Belt tension sensor is scratched, cracked, or de-
formed.
• Harness and/or connector is cracked, deformed
or open. Harness wire is exposed.
AB-13