Subaru B9 TRIBECA WX 2007 Manual page 381

asieps_tobira.book 28 ページ ２０１２年２月１０日 金曜日 午後３時２６分
EXTERIOR/INTERIOR TRIM
7. Rear Bumper
A: REMOVAL
1. REAR BUMPER FACE
1) Remove the clips, and then remove the reflector.
2) Turn over the mud guard, and remove the clip
(A) and (B) inside wheel house and in the lower
side of bumper.
(B)
3) Remove the clips on the lower side of rear
bumper.
Rear Bumper
4) Remove the rear bumper from vehicle body.
CAUTION:
Do not pull with a excessive force. Otherwise
the bracket installation area may be damaged.
NOTE:
EI-01273
When removing the bumper face from bracket, it is
easier to remove from the end in order.
2. REAR BUMPER BRACKET
1) Remove the rear bumper face from vehicle
body.
(A)
2) Remove the corner bracket.
EI-00580
3) Remove the lower brackets from vehicle body.
EI-01274
EI-28
(3)
(2)
(1)
EI-01275
EI-01276
EI-01277