Subaru B9 TRIBECA WX 2007 Manual page 400

asieps_tobira.book 47 ページ ２０１２年２月１０日 金曜日 午後３時２６分
20.Floor Mat
A: REMOVAL
1. FRONT FLOOR MAT
1) Remove the front seats. <Ref. to SE-7, REMOV-
AL, Front Seat.>
2) Remove the second row seats. <Ref. to SE-13,
REMOVAL, Second-Row Seats.>
3) Remove the console box. <Ref. to EI-38, RE-
MOVAL, Console Box.>
4) Remove the instrument panel lower cover. <Ref.
to EI-36, REMOVAL, Instrument Panel Lower Cov-
er.>
5) Remove the glove box. <Ref. to EI-37, REMOV-
AL, Glove Box.>
6) Remove the following trims. <Ref. to EI-43, RE-
MOVAL, Side Trim.>
• Front door scuff plate
• Rear door scuff plate
• Front pillar lower trim
• Center pillar lower trim
7) Remove the remote opener cover. <Ref. to SL-
44, REMOVAL, Remote Openers.>
8) Remove the navigation unit. <Ref. to ET-23, RE-
MOVAL, Navigation Body.>
9) Remove the clips, then remove the front floor
mats.
Floor Mat
2. REAR FLOOR MAT
1) Remove the second row seats. <Ref. to SE-13,
REMOVAL, Second-Row Seats.>
2) Remove the third-row seats. (7 seater mod-
el)<Ref. to SE-18, REMOVAL, Third-Row Seats.>
3) Remove the luggage box (front). (5 seater mod-
el)
4) Remove the rear quarter lower trim. <Ref. to EI-
45, REMOVAL, Rear Quarter Trim.>
5) Remove the clips, then remove the rear floor
mats.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
• Secure the mat firmly with hook and clip.
• Insert the mat edge firmly into the groove of side
sill cover.
EI-01351
EI-47
EXTERIOR/INTERIOR TRIM
EI-01352