Subaru B9 TRIBECA WX 2007 Manual page 758

asieps_tobira.book 16 ページ ２０１２年２月１０日 金曜日 午後３時２６分
SEATS
6) Remove the two screws securing the holder.
7) Disconnect the wire connected to the holder,
then remove the holder.
8) Disconnect the wire connected to the reclining
hinge.
9) Remove the four reclining hinge bolts of 2nd
seat RH, then remove the seat backrest.
10) Remove the two screws securing the reclining
lever cover.
Second-Row Seats
11) Remove the reclining lever cover.
SE-00614
12) Remove the headrest lock bushing.
NOTE:
Push outward from inside of the seat to remove.
13) Pull out the frame from the backrest.
14) Remove the hog rings (A) of backrest, and then
remove the backrest cover from backrest.
SE-00615
15) Remove the hooks and hog rings (A) from the
rear side of seat cushion.
SE-00616
16) Remove the seat cushion from the slide rail as-
sembly.
SE-00617
SE-16
: (A)
: (A)
SE-00618
SE-00606
SE-00619