Subaru B9 TRIBECA WX 2007 Manual page 405

asieps_tobira.book 52 ページ ２０１２年２月１０日 金曜日 午後３時２６分
EXTERIOR/INTERIOR TRIM
25.Rear Gate Garnish
A: REMOVAL
1) Remove the hexagon cap nut (A).
(A)
2) Remove the rear gate garnish.
(A) Hexagon cap nut
(B) Double-sided tape
B: INSTALLATION
Use new double-sided tapes, and install in the re-
verse order of removal.
NOTE:
Refer to the installing procedure of side garnish.
Tightening torque:
4.5 N·m (0.46 kgf-m, 3.32 ft-lb)
Rear Gate Garnish
EI-01355
(B)
(A)
EI-01356
EI-52