Subaru B9 TRIBECA WX 2007 Manual page 601

asieps_tobira.book 26 ページ ２０１２年２月１０日 金曜日 午後３時２６分
Read Current Data
LAN SYSTEM (DIAGNOSTICS)
9. Read Current Data
A: OPERATION
1) On the «Main Menu» display screen, select the
{Each System Check}.
2) On the «System Selection Menu» display
screen, select the {Integ. unit mode}.
3) On the «Integ. unit mode failure diag» display
screen, select the {Current Data Display & Save}.
4) On the «Data Display Menu» screen, select the
{12 Data Display}.
5) Using the scroll key, scroll the display screen up
or down until the desired data is shown.
<Ref. to LAN(diag)-13, DISPLAY OF ANALOG DA-
TA, OPERATION, Subaru Select Monitor.> <Ref.
to LAN(diag)-14, DISPLAY OF ON/OFF DATA,
OPERATION, Subaru Select Monitor.> <Ref. to
LAN(diag)-18, CONFIRMATION OF CURRENT
SETTING, OPERATION, Subaru Select Monitor.>
LAN(diag)-26