Subaru B9 TRIBECA WX 2007 Manual page 269

asieps_tobira.book 2 ページ ２０１２年２月１０日 金曜日 午後３時２６分
CRUISE CONTROL SYSTEM (DIAGNOSTICS)
1. Basic Diagnostic Procedure
A: PROCEDURE
Step
1 CHECK MALFUNCTION INDICATOR LIGHT.
1) Start the engine.
2) Make sure the malfunction indicator light
illuminates.
2 CHECK CRUISE INDICATOR LIGHT.
Make sure the cruise indicator light blinks.
3 CHECK CRUISE CONTROL MAIN SWITCH
OPERATION.
Check cruise control main switch operation.
(Ensure the cruise indicator light illuminates.)
4 CHECK CRUISE CONTROL SET OPERA-
TION.
Check the cruise control setting operation.
5 PERFORM CRUISE CONTROL CANCEL
CONDITIONS DIAGNOSIS.
Perform the cruise control cancel conditions
diagnosis. <Ref. to CC(diag)-7, CRUISE CON-
TROL CANCEL CONDITIONS DIAGNOSIS,
OPERATION, Subaru Select Monitor.>
6 CHECK CRUISE SET INDICATOR LIGHT.
Make sure the cruise set indicator light illumi-
nates.
7 CHECK VEHICLE SPEED IS HELD WITHIN
SET SPEED.
Make sure the vehicle speed is held within set
speed.
8 CHECK RESUME/ACCEL OPERATION.
Check the RESUME/ACCEL switch operation.
Basic Diagnostic Procedure
Check
Does the malfunction indicator
light illuminate?
Does the cruise indicator light
blink?
Is the cruise control main switch
turned on? (Does the cruise
indicator light illuminate?)
Can the cruise control be set
while driving at more than 40
km/h (25 MPH)?
Is DTC displayed?
Does the cruise set indicator
light illuminate?
Is the vehicle speed kept within
setting speed ±3 km/h (±2
MPH)? (Make sure that on a
level road.)
Does the vehicle speed
increase or return to set speed
after RESUME/ACCEL switch
has been pressed?
CC(diag)-2
Yes No
Go to step 5. Go to step 2.
Go to step 5. Go to step 3.
Go to step 4. Go to phenome-
non 1. <Ref. to
CC(diag)-9, DIAG-
NOSTIC PROCE-
DURE WITH
PHENOMENON,
Diagnostics with
Phenomenon.>
Go to step 6. Go to step 5.
Go to "List of Diag- Go to phenome-
nostic Trouble non 2. <Ref. to
Code (DTC)". CC(diag)-9, DIAG-
<Ref. to CC(diag)- NOSTIC PROCE-
12, List of Diagnos- DURE WITH
tic Trouble Code PHENOMENON,
(DTC).> Diagnostics with
Phenomenon.>
Go to step 7. Go to phenome-
non 3. <Ref. to
CC(diag)-9, DIAG-
NOSTIC PROCE-
DURE WITH
PHENOMENON,
Diagnostics with
Phenomenon.>
Go to step 8. Go to phenome-
non 4. <Ref. to
CC(diag)-9, DIAG-
NOSTIC PROCE-
DURE WITH
PHENOMENON,
Diagnostics with
Phenomenon.>
Go to step 9.
Go to phenome-
non 5. <Ref. to
CC(diag)-9, DIAG-
NOSTIC PROCE-
DURE WITH
PHENOMENON,
Diagnostics with
Phenomenon.>