Subaru B9 TRIBECA WX 2007 Manual page 428

asieps_tobira.book 21 ページ ２０１２年２月１０日 金曜日 午後３時２６分
Windshield Glass
GLASS/WINDOWS/MIRRORS
11) Fit the locating pins, and install windshield
glass using suction rubber cup.
GW-00045
12) Lightly press the windshield glass for tight fit.
13) Make flush the adhesive surface jutted out us-
ing spatula.
14) After completion of all work, allow the vehicle to
stand for about 24 hours.
NOTE:
• When door is opened/closed after glass is bond-
ed, always lower the door glass first, and then
open/close it carefully.
• Move the vehicle slowly.
• For minimum drying time and vehicle standing
time before driving after bonding, follow instruc-
tions or instruction manual from the adhesive man-
ufacturer.
15) After curing of adhesive, pour the water on ex-
ternal surface of vehicle to check that there are no
water leaks.
NOTE:
When a vehicle is returned to the user, tell him or
her that the vehicle should not be subjected to
heavy impact for at least three days.
16) Install the cowl panel. <Ref. to EI-30, INSTAL-
LATION, Cowl Panel.>
GW-21