asieps_tobira.book 17 ページ 2012年2月10日 金曜日 午後3時26分
12.Rear Regulator and Motor
Assembly
A: REMOVAL
1) Remove the rear door glass. <Ref. to GW-16,
REMOVAL, Rear Door Glass.>
2) Disconnect the motor connector.
3) Remove the four bolts and two nuts to remove
regulator assembly.
4) Remove the screws to remove motor assembly.
B: INSTALLATION
1) Install in the reverse order of removal.
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion". <Ref. to GW-4, REAR DOOR GLASS,
COMPONENT, General Description.>
C: INSPECTION
1) Make sure that the power window motor rotates
properly when the battery voltage is applied to the
terminals of motor connector.
2) Change polarity of battery connection to termi-
nals to ensure that the motor rotates in reverse di-
rection.
Rear Regulator and Motor Assembly
GW-00492
GW-00493
GW-17
GLASS/WINDOWS/MIRRORS