Subaru B9 TRIBECA WX 2007 Manual page 742

asieps_tobira.book 14 ページ ２０１２年２月１０日 金曜日 午後３時２６分
SEAT BELT SYSTEM
7. Third Seat belt
A: REMOVAL
1. OUTER SEAT BELT RH ASSEMBLY AND
LH ASSEMBLY
1) Remove the third-row seats. <Ref. to SE-18,
REMOVAL, Third-Row Seats.>
2) Remove the rear quarter trim. <Ref. to EI-45,
REMOVAL, Rear Quarter Trim.>
3) Remove the bolts, and then detach the outer
seat belt assembly.
2. INNER SEAT BELT RH ASSEMBLY AND
LH ASSEMBLY
1) Remove the third-row seats. <Ref. to SE-18,
REMOVAL, Third-Row Seats.>
2) Remove the bolt, and then detach the inner seat
belt assembly.
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
When installing, be careful of the routing of the
seatbelt, and make sure that the belt is not
twisted.
C: INSPECTION
Check for the following, and replace with new parts
if necessary.
• Seat belt is slackened, bent or worn. Seat belt is
abnormally wound or extended.
• Inner belt is deformed or damaged.
• Seat belt buckle cannot be engaged properly.
Third Seat belt
SB-00309
SB-00313
SB-14