Subaru B9 TRIBECA WX 2007 Manual page 509

asieps_tobira.book 30 ページ ２０１２年２月１０日 金曜日 午後３時２６分
HVAC SYSTEM (HEATER, VENTILATOR AND A/C)
10.Blower Resistor (Dual A/C
Model)
A: REMOVAL
1) Remove the left rear quarter trim. <Ref. to EI-45,
REMOVAL, Rear Quarter Trim.>
2) Disconnect the blower resistor connector.
3) Remove the lock (A) and rotate it to the right to
remove the blower resistor.
(A)
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
(2)
(4)
Measure the blower resistor resistance.
Terminal No.
1 and 3
1 and 2
4 and 1
If NG, replace the blower resistor.
Blower Resistor (Dual A/C Model)
AC-01321
(1)
(3)
AC-01322
Standard
Approximately 0.42 Ω
Approximately 1.42 Ω
Approximately 3.4 Ω
AC-30