Transferring Without Holding; Transferring Intercom Calls; Transferring A Call Into A Conference/Existing Call - NEC UNIVERGE SV9100 Features And Specifications
Hide thumbs
Also See for UNIVERGE SV9100:
- Programming manual (954 pages) ,
- Manual (766 pages) ,
- System hardware manual (740 pages)
Table of Contents
Advertisement
If your co-worker does not want the call, press the flashing line key to return to the call.
Single line telephone users can press hookflash to retrieve the call. If a call was transferred and the
user has hung up the handset, only the unanswered call be can retrieved by dialing
extension number to which it had been transferred.
If you do not want to screen the call, hang up without making an announcement.
To answer a call transferred to your extension:
1.
Lift the handset or press Speaker when a co-worker announces the call.
Transferring without Holding
To Transfer without holding (multiline terminal only):
1.
Lift the handset.
2.
Press busy line or press Speaker.
3.
When original caller hangs up, you are connected.
Transferring Intercom Calls
To Transfer your Intercom call:
1.
At the multiline terminal, press Hold.
- OR -
At single line telephone, hookflash.
2.
Dial extension to receive your call.
If the extension is busy, does not answer or does not want the call, you can dial another extension
number or press the lit line key to return to the call. In addition, you may be able to hang up and have
the call Camp-On.
Single line telephone users can press hookflash to retrieve the call. If a call was transferred and the
user has hung up the handset, only the unanswered call can be retrieved by dialing
extension number to which it transferred.
3.
Announce your call and press Transfer (Program 15-07 or SC 851: 06) or hang up.
With Automatic On-Hook Transfer
When you hang up, the call is automatically transferred.
Without Automatic On-Hook Transfer
You must press your Transfer Programmable Function Key to Transfer the call.
To Transfer the call unscreened, press your Transfer Programmable Function Key and hang up
without making an announcement.
Transferring a Call Into a Conference/Existing Call
1.
While on a call, press Transfer and dial service code allocated.
The display shows the Transfer to Conf. ICM Dial.
2.
Enter the extension number of the co-worker currently on a Conference call to which the call
should be transferred.
To cancel the transfer, press the flashing line key to retrieve the call.
If an error tone is heard, Barge-In is not enabled for the extension and the call does not go through.
1231
and the
**
and the
**
Advertisement
Table of Contents
