Analog Devices ADV8003 Hardware Manual page 221

spi1_sclk_oe_man_en, IO Map, Address 0x1ACE[4]
This bit is used to control the output enable manual override for spi1_sclk.
Function
spi1_sclk_oe_man_en
0
1 
spi2_cs_oe_man_en, IO Map, Address 0x1ACE[3]
This bit is used to control the output enable manual override for spi2_cs.
Function
spi2_cs_oe_man_en
0
1 
spi2_miso_oe_man_en, IO Map, Address 0x1ACE[2]
This bit is used to control the output enable manual override for spi2_miso.
Function
spi2_miso_oe_man_en
0
1 
spi2_mosi_oe_man_en, IO Map, Address 0x1ACE[1]
This bit is used to control the output enable manual override for spi2_mosi.
Function
spi2_mosi_oe_man_en
0
1 
spi2_sclk_oe_man_en, IO Map, Address 0x1ACE[0]
This bit is used to control the output enable manual override for spi2_sclk.
Function
spi2_sclk_oe_man_en
0
1 
For the majority of functions, the SPI ports can be left in automatic mode. If using the SPI ports in manual mode, the direction of the
various pins can be configured using the following bits.
spi1_cs_oe_man, IO Map, Address 0x1ACD[7]
This bit is used to control the output enable for spi1 chip select.
Rev. B, August 2013
Description
Auto
Manual override
Description
Auto
Manual override
Description
Auto
Manual override
Description
Auto
Manual override
Description
Auto
Manual override
221
ADV8003 Hardware Manual