Schlage PIB300 User Manual page 155

Hide thumbs Also See for PIB300:

Table of Contents

2.3.2 Australian Version

2.3.2.1 Australian Non Dynamic Channel Switching (default)

When using the Australian version of Schlage Wireless Access products in the non dynamic

channel switching mode, one of seven RF channels can be set using DIP switch SW7 on the PIM

(Figure 2-1 or Figure 2-2). Table 2-7 shows how to set the PIM's SW7 switches to select the

desired RF channel:

2.3.2.2 Australian Dynamic Channel Switching

When using the Australian version of Schlage Wireless Access products in the dynamic channel

switching mode, one of two RF channel groups can be set using DIP switch SW7 on the PIM

(Figure 2-1 or Figure 2-2). Table 2-8 shows how to set the PIM's SW7 switches to select the

desired RF channel:

When the PIM is wired to the panel, power is applied, and the RF Channel is set, the PIM is

ready to enter Link Mode.

245 W. Roosevelt Road, Bldg 7, Suite 48, West Chicago, IL 60185 / (800) 313-2962 / (630) 293-4257 fax

P/N: M053-007-D

Table 2-7 – DIP Switch Setting to Select the RF Channel

NOTE: The first ten switch settings select Channel 9.

Channel Group

Table 2-8 – DIP Switch Setting to Select the RF Channel Group

Ingersoll Rand Security Technologies

www.ir-swa.com

Wireless Access

Page 13 of 60

Show Quick Links

Chapters

Table of Contents