Schlage PIB300 User Manual page 154

2.3.1.2 United States Dynamic Channel Switching
When using the United States version of Schlage Wireless Access products in the dynamic
channel switching mode, one of five RF channel groups can be set using DIP switch SW7 on the
PIM (Figure 2-1 or Figure 2-2). Table 2-6 shows how to set the PIM's SW7 switches to select
the desired RF channel:
When the PIM is wired to the panel, power is applied, and the RF Channel is set, the PIM is
ready to enter Link Mode.
245 W. Roosevelt Road, Bldg 7, Suite 48, West Chicago, IL 60185 / (800) 313-2962 / (630) 293-4257 fax
P/N: M053-007-D
Channel Group Switch 1
1, 6, 11
up
1, 6, 11
up
2, 7, 12
up
3, 8, 13
up
4, 9, 14
up
5, 10, 15
up
1, 6, 11
up
2, 7, 12
up
3, 8, 13
down
4, 9, 14
down
5, 10, 15
down
1, 6, 11
down
2, 7, 12
down
3, 8, 13
down
4, 9, 14
down
5, 10, 15
down
Table 2-6 – DIP Switch Setting to Select the RF Channel Group
Ingersoll Rand Security Technologies
www.ir-swa.com
Wireless Access
Switch 2 Switch 3 Switch 4
up up
up up
up down
up down
down up
down up
down down
down down
up up
up up
up down
up down
down up
down up
down down
down down
up
down
up
down
up
down
up
down
up
down
up
down
up
down
up
down
Page 12 of 60