Start Vm - H3C MSR 810 Command Reference Manual

Parameters
: Specifies a VM by its name. The
vm-name
characters.
mac mac-address
hexadecimal string in the format of xxxx-xxxx-xxxx.
vlan vlan-id
to 4094.
Usage guidelines
Before you use this command, use the
address of the vTap NIC.
Examples
# Assign the vTap interface of VM centos7 to VLAN 10.
<Sysname> system-view
[Sysname] vmm
[Sysname-vmm] set vtap vm centos7 mac 0010-1110-5872 vlan 10
Related commands
display vminterface

start vm

Use
start vm
Syntax
start vm vm-name
Views
VMM view
Predefined user roles
network-admin
Parameters
vm-name : Specifies a VM by its name. The
characters.
Usage guidelines
Make sure the VM you want to start has been created on the device and the system has sufficient
memory to start the VM.
Use this command to start a VM only when the VM is in shut off state. To view VM status, use the
display vmlist
Examples
# Start VM centos7.
<Sysname> system-view
[Sysname] vmm
[Sysname-vmm] start vm centos7
Related commands
display vmlist
: Specifies a vTap NIC by its MAC address. The
: Specifies a VLAN by its VLAN ID. The value range for the
to start a VM.
command.
argument is a case-sensitive string of 1 to 30
vm-name
display vminterface
vm-name argument is a case-sensitive string of 1 to 30
29
argument is a
mac-address
argument is 1
vlan-id
command to obtain the MAC