About This Guide; Before You Start; Release Notes; About Your Cd-Rom - 3Com SuperStack 3 Switch 4400 Series Getting Started Manual

Before You Start

Release Notes

About Your CD-ROM

A T
BOUT HIS
This guide provides all the information you need to install and use a
®
SuperStack 3 Switch 4400 in its default state.
This guide is intended for use with Switch 4400 models:
3C17203, 3C17205 and 3C17206 — 24 10BASE-T/100BASE-TX ports
■
3C17204 — 48 10BASE-T/100BASE-TX ports
■
All procedures described in this guide apply to all models except where
stated.
The guide is intended for use by network administrators who are
responsible for installing and setting up network equipment;
consequently, it assumes a basic working knowledge of LANs (Local Area
Networks).
This section contains information about the CD-ROM that accompanies
your Switch 4400.
The CD-ROM contains Release Notes which provide important
information about the current software release, including new features,
modifications, and known problems. You should read the Release Notes
before installing the Switch in your network.
If the information in the Release Notes differ from the information in this
guide, follow the instructions in the Release Notes.
The CD-ROM also contains the following:
Online documentation for the Switch 4400 — refer to
■
Documentation on
G
UIDE
page 5 for details.
Related