JOG operation from the operation panel
Operate only while FWD or REV key is pressed.
Operation example: Operate at 5 Hz.
Screen at power-ON
The monitor display appears.
Changing the operation mode
Start ➔ acceleration ➔ constant speed
deceleration time", and "
Deceleration ➔ stop
time", and the motor stops rotating with "
To change the running frequency, change Pr. 15 "Jog frequency" (initial value "5 Hz").
To change the acceleration/deceleration time, change Pr. 16 "Jog acceleration/deceleration time"
(initial value "0.5 s").
Parameters referred to
twice to choose the PUJOG operation mode. The monitor displays "
. The frequency value on the indication increases in Pr. 16 "Jog acceleration/
" (5.00 Hz) appears.
. The frequency value on the indication decreases in Pr. 16 "Jog acceleration/deceleration
JOG operation performed on the operation panel
Jog acceleration/deceleration time
Basic operation procedure (JOG operation)
Jog operation performed on the operation panel
" (0.00 Hz) displayed.
", and [PU] indicator is lit.
4 - 31