Maintaining The Routing Policy - Huawei Quidway NetEngine80E Configuration Manual

HUAWEI NetEngine80E/40E Router
Configuration Guide - IP Routing
Prerequisites
Controlling the valid time of the routing policy has been configured.
Procedure
l
----End
Example
Run the display current-configuration command. You can find the delay for applying the
routing policy. For example:
<HUAWEI> display current-configuration | include notify-delay
route-policy-change notify-delay 10

10.8 Maintaining the Routing Policy

Maintaining routing policies involves clearing the statistics of the IP prefix list and clearing the
number of routes which match or do not match the Route-Policy.
Context
The statistics of IP prefix lists and the number of routes which match or do not match the Route-
Policy cannot be restored after being cleared. Exercise caution when running this command.
By default, the statistics of IP prefix lists and the number of routes which match or do not match
the Route-Rolicy are not cleared.
Procedure
l
l
l
----End
10.9 Configuration Examples
The configuration examples in this section explain the networking requirements, networking
diagram, configuration notes, configuration roadmap, and configuration procedure for different
types of routing policies.
Issue 02 (2014-09-30)
Run the display current-configuration | include notify-delay command to check the
delay for applying the routing policy.
NOTICE
Run reset ip ip-prefix [ ip-prefix-name ] command in the user view to clear the IPv4 prefix
list statistics.
Run reset ip ipv6-prefix [ ipv6-prefix-name ] command in the user view to clear the IPv6
prefix list statistics.
Run reset route-policy route-policy-name counters command in the user view to clear the
number of routes which match or do not match the Route-Rolicy.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Routing Policy Configuration
1251