Configuring Basic Gatekeeper Settings - Avaya Scopia XT Telepresence Deployment Manual

Table 7: Configuring the IP address
Field Name
IP Address Mode or
Automatic IP Address
IP address
Subnet mask
Gateway (IP Address)
DNS (Server IP
Address)
3. Select Next and continue with one of the following, depending on whether you are
registering your endpoint to a gatekeeper or SIP server:
• If you are registering your endpoint to a gatekeeper, continue with
Gatekeeper Settings
• If you are only registering your endpoint to a SIP server (and not a gatekeeper), continue
with Configuring Basic SIP Settings
Related links
Configuring Basic Settings with the Quick Setup Wizard

Configuring Basic Gatekeeper Settings

About this task
Configure the gatekeeper settings if your Avaya Scopia
routes audio and video H.323 calls by resolving dial strings (H.323 alias or URI) into the IP address
of an endpoint, and handles the initial connection of calls. To modify advanced gatekeeper settings,
see Deployment Guide for Avaya Scopia
January 2017
Configuring Basic Settings with the Quick Setup Wizard
Description
Determines if the IP address is dynamically allocated (using DHCP), or if
you manually designate a static IP address. You must use only static
addresses for:
• XT Telepresence deployments
• Units on a public network
• SIP deployments where the unit is secured with a TLS certificate, if the
certificate request has been tied to a specific IP address.
Enter the system static IP address. For dynamic IP addresses, this field
displays the current IP address.
Enter the subnet mask associated with the IP address. For dynamic IP
addresses, this field displays the current subnet mask.
Enter the default gateway static IP address. The gateway is used to route
information between two subnets, for example, between the headquarters
and a partner site. For dynamic IP addresses, this field displays the
current gateway IP address.
Enter the DNS server IP address. The DNS server translates domain
names into IP addresses. For dynamic IP addresses, this field displays
the assigned DNS server IP address.
For web collaboration and cloud connection to Avaya Equinox
Management, you must insert a valid DNS address.
on page 57.
on page 58.
®
XT Series.
®
Avaya Scopia XT Telepresence Deployment Guide
Comments on this document? infodev@avaya.com
Configuring Basic
on page 51
®
XT Series works with one. A gatekeeper
57